Falling incidents are some reasons of the most predominant causes of work-related accidents resulting to severe injury and sometimes death. When the job environment requires employees to work from raised positions, the employer is required to put in place mitigating measures to guard against the accidental falling of workers. If the working position is above 5 feet above the ground, then some form of fall protection like a harness or any other kind of fall arresting system should be used.
Fall protection is also vital if an individual is working above dangerous equipment irrespective of the height that is above it. Employers are required to also provide guard rails on the sides of any elevated open platform to protect their workers against accidentally falling over. The different types of floors that employees are working on should be surrounded by guard rails and covered with the right hole cover. Employers can also use safety nets, handrails, or staircase railings to guard against unharnessed fall into open spaces.
The floors of working spaces should also be kept clean and dry to protect the workers against accidentally slipping and falling. Any known dangers that an employee can be prone to should also be adequately guarded against. In case employees ask for special equipment that can enhance their safety against any industrial fall ,it is the mandate of the company to provide them with the right treatment at no extra cost.
It’s also important to train the workers on safety measures that they can employ and the use of safety equipment for them to stay safe. Any potential falling dangers should be made known to the employees so that they can exercise the relevant caution when working within the locale of such dangers. Anchorage used together with rope descent systems need to be inspected time after time to ensure a good working condition. Any ladders that stretch over 24 feet should be equipped with a cage to serve as a fall arrest system.
Specific fall protection requirements apply to several different industries and employers are required to invest in fall mitigation measures that are related to their industry. For instance, with regards to the construction industry, all leading edges with a height of at least 6 feet above the ground are required to have guardrails for protection. When working on roofs, the workers must be protected against falls by harness systems, safety nets, and guard rails. Industrial fall protection systems should be made out of material that is strong enough to easily support a person’s weight in addition to that of any other work-related equipment that he or she could be carrying.